Quartz Bangers & Nails
Not sure which banger fits your rig? Our quartz banger guide explains how to match joint size, gender, and style in about two minutes, so you order the right piece the first time.
Quartz Bangers and Nails: The Right Banger for Your Dab Rig
If you're serious about concentrates, the quality of your banger is the single biggest factor in how good your dabs taste. Quartz is the gold standard for a reason. It's chemically inert, so it doesn't introduce any off-flavors or compounds into your vapor the way titanium and ceramic can. It retains heat evenly across the entire banger surface, which means consistent vaporization from the first dab to the last. And it's completely transparent, so you can watch your concentrates melt and know exactly when your banger is at the right temperature. Choosing a banger for your dab rig comes down to three things, joint size, gender and angle, and all three are covered below.
AFM's quartz banger collection covers every major style used by concentrate enthusiasts today. Flat-top bangers are the classic choice, offering a wide opening for easy loading and a flat rim that carb caps seal perfectly. Terp slurpers are designed for heavier concentrate loads, using a multi-tube design that pulls material up into the heated zone for full vaporization with almost no waste. Beveled-edge bangers provide a tighter carb cap seal for controlled airflow during low-temp dabs. All bangers are available in 10mm, 14mm, and 18mm joint sizes in both male and female configurations to fit virtually any dab rig or recycler rig.
Proper care makes a major difference in banger longevity. Season a new banger before its first use by heating it and wiping away any residue. After each dab, use a cotton swab to clean the banger while it's still slightly warm, before residue has a chance to char onto the surface. A well-maintained quartz banger can last years and keep delivering clean, terpene-rich vapor every session. Pair your banger with the right carb cap and some terp pearls for the most efficient low-temp setup possible.
Why Quartz Is the Right Choice
- Chemically inert so you taste concentrates, not the banger
- Even heat retention for consistent, full vaporization
- Flat-top, terp slurper, and beveled-edge styles available
- Available in 10mm, 14mm, and 18mm joint sizes
- Compatible with all carb cap styles and terp pearl setups
Browse the full quartz banger and nail collection below to find a banger for your dab rig in the right joint size, gender and angle. Looking to complete your concentrate setup? Check out our carb caps, dabber tools, and glass dab rigs for everything you need to run a proper low-temp setup.
How to Pick the Right Banger for Your Dab Rig
1. Match the joint size. Rigs use 10mm, 14mm or 18mm joints, and 14mm is by far the most common. If you already own a bowl or banger that fits, measure it or check the listing it came from. Get this step wrong and nothing else matters.
2. Match the gender. Look at the joint on your rig. If it sticks out, you need a female banger that slides over it. If it is a hole you drop a piece into, you need a male banger. If you do end up with a mismatch, a glass adapter converts between sizes and genders instead of forcing you to reorder.
3. Match the angle. Bangers come in 45 and 90 degree. A 45 degree banger suits a rig with an angled joint, which covers most dab rigs, and keeps the bucket sitting level so oil pools at the bottom. A 90 degree banger suits a rig with a straight vertical joint. Sit your rig flat and look at the joint: if it leans, go 45.
Do You Need a Carb Cap and Terp Pearls?
A banger works on its own, but a carb cap is what makes low temp dabs worth taking. Capping the bucket restricts airflow and drops the pressure inside, so your concentrate vaporizes fully at a lower temperature, which is where the flavor lives. Match the cap to the banger: a flat rim wants a flat or bubble cap, a beveled edge wants a directional cap you can spin, and a terp slurper wants its own slurper cap. Terp pearls are optional. Drop one or two into the bucket and they roll as you draw, spreading oil across the hot surface so less of it sits in a puddle and chars. Browse carb caps to finish the setup, or our bong parts and accessories range if you are restocking more than one piece.
Related AFM Glass Collections
Pair your banger with a carb cap to lock in low-temp airflow and a dabber tool for clean concentrate loading. Need a rig to mount it on? Browse our dab rigs collection or our recycler dab rigs for extra water filtration.
Quartz Banger FAQs
Flat-top vs terp slurper quartz banger: what's the difference?
Flat-top bangers are the classic shape, with a wide opening that's easy to load and a flat rim that seals well with any carb cap. Terp slurpers use a multi-tube design (a slot at the bottom and pillars) that pulls concentrate up into the heated zone. Slurpers waste less material and need less cap manipulation. Flat-tops are simpler and more forgiving.
What size quartz banger do I need?
Match the joint size and gender on your rig. AFM bangers are available in 10mm, 14mm, and 18mm in both male and female. 14mm male is the most common dab rig setup. If you're not sure, look at the joint on your rig: if it sticks out, you need a female banger. If it has a hole, you need a male banger.
How do I season a new quartz banger?
Heat the banger until it glows red, dunk it in cool water (or wipe with a wet cotton swab), and repeat 2 to 3 times. This burns off manufacturing residue and any oils from handling. After seasoning, your first dab will taste clean rather than off.
Quartz vs ceramic banger: which is better?
Quartz is chemically inert, holds heat evenly, and stays transparent so you can see your dab. Ceramic holds heat longer (good for multiple dabs from one heat cycle) but can crack from thermal shock and isn't transparent. For flavor and longevity, quartz is the standard. Ceramic suits users who want longer heat retention and don't mind less visibility.
How do I clean a quartz banger?
Best practice: swab the banger with a cotton Q-tip while it's still warm after each dab, before residue chars on. For deeper cleaning, soak in 91 percent isopropyl alcohol for 30 minutes and wipe out. Avoid torching off heavy buildup. Carbon stains burn into the quartz and ruin flavor.
Is a 45 or 90 degree banger better for a dab rig?
Neither is better, it depends on the joint on your rig. Most dab rigs have an angled joint and take a 45 degree banger, which keeps the bucket sitting level so concentrate pools at the bottom instead of running toward the opening. A rig with a straight vertical joint takes a 90 degree banger. Sit the rig flat and look at the joint: if it leans, go 45.
What temperature should I heat a quartz banger to?
Low temp dabs are taken well below red hot. Heat the banger, let it cool for a stretch, then drop in your concentrate and cap it. Hotter gives you bigger clouds but a harsher, less flavorful hit, while cooler protects flavor and can leave a little oil behind. A temperature reader takes the guesswork out, though most dabbers find their timing after a few sessions and stick with it.
Where do AFM quartz bangers ship from?
Every AFM banger ships from our warehouse in Los Angeles. US shipping is free on orders over $75, and a flat $7.50 under that.